Residential  - 10.26kW Fronius + REC Single Phase Grid Package

Request a Quote

Name: *
Phone:
Email: *
Postcode: *
I may require:
Roof structural check
Measure
Shading check
Circuit board/meter inspection
Finance
Comments:

 

GoldGuarantee.jpg


Price: $11,614.00

  REC LOGO.png-- Manufacturing Process

REC Peak Series Web page link  Opens in new tab

  • x38 270 REC Peak SeriesPanels
  • Panels have a 10 Year manufacturers warranty
  • +5% Power tolerance &Very high NOCT (Normal operating cell temp) of 48Deg
  • 25 Year cell performance Warranty
  • They are excellent Low Light and hot climate Performers made to suit Australian conditions

Financial strength

Secure investments REC scores best among PV manufacturers in proven Altman-Z score REC is a "safe bet" with the least chance of bankruptcy → Supports REC's longevity and leadership in the market

ALTMAN -Z-SCORE pdf - Opens in new tab



REC Panel upgrade to the latest tech

REC Twin Peak Series 290W

Twin Peak data sheet

Twin Peak REC web page opens in new tab


REC twinpeak2_blk2_solo.jpeg

Inverter 5kW Export Limited

This systems inverter will not send back more than 5kW of its 8kW Capacity back to the grid but will allow the full 8kW inverters AC output to be used within the home.

 Export limiting is managed via Fronius Smart Meter installed with your Meter Box (see more detail below) This is to gain grid approval on single phase networks/grids for systems above 5kW

 Fronius Primo 8.2kW Inverter  Manufactured in Austria

Fronius Web Link Opens in a new tab

Fronius also have hybrid battery inverters and solar batteries available

Optimised energy management 

The Fronius Primo in power categories from 3.0 to 8.2 kW perfectly completes the new SnapINverter generation. This single-phase device is the ideal inverter for residential systems. Its innovative SuperFlex Design provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and maintenance easier than ever before. The included communication package, with WLAN, energy management, several interfaces and much more, allows the Fronius Primo to communicate with the user, the PV system, and the grid. 

 

Fronius Primo.jpg

Fronius Primo

Fronius warranty snap St.png

Fronius Smart Meter 63A­ Single Phase

The bi-directional meter for recording power consumption in the home The Fronius Smart Meter is a bi-directional meter which optimises self-consumption and records the household‘s load curve. Thanks to highly accurate measurements and rapid communication via the Modbus RTU interface, dynamic feed-in control when feed-in limits are imposed is faster and more accurate than with the S0. Together with Fronius Solar.web, the Fronius Smart Meter presents a clear overview of power consumption within the home. In the Fronius Energy Package storage solution based on the Fronius Symo Hybrid, the Fronius Smart Meter provides perfectly coordinated management of the various energy flows and optimises overall energy management. The Fronius Smart Meter is ideally suited for use with the Fronius Symo, Fronius Symo Hybrid, Fronius Galvo inverters and the Fronius Datamanager 2.0

 

Fronius 1ph meter pic.png

Installed in Meter Box

Limits Power going back to grid, in line with network operators regulations for systems 5kW>

Display VIA iPhone or Android App - how much power you Import/Export 

 

SMA  & Power One Aurora, Delta,

You name it we can get it! but products we have listed are from the best in the business If you must have good quality then look no further!

On the cheaper end of the scale, you could save up to $700 on this package by installing a cheaper inverter option from manufacturers like JFY or ZeverSola 

 

Roof Mounting Systems

 Clenergy LOGO.png

SOLAR ROOF MOUNTING RAIL Clenergy provides a 10-year product warranty for your peace of mind.

Clenergy Rail Pic.png

The Clenergy PV-ezRack® SolarRoof™ is designed for residential and commercial applications. This system allows installation on tile and tin roofs, as well as pitched and flat roofs. It withstands wind speeds up to 88 meters per second through its robust design and high-quality materials. Corrosion resistance is achieved through anodised structural grade aluminum and stainless steel components. The unique and innovative Z-module technology enables surprisingly quick and easy installation. 

 The fully compliant clip-on clamps eliminate the need for roof penetration on concealed type roofs, and the adjustable tilt legs provide flexibility in application. As part of the PV-ezRack® range, SolarRoof™ comes with a 10-year product warranty.


 

Clenergy Product Video-Pitch Roof,  Clenergy Product Video-Flat Roof

Installation

  • 7 Year warranty on workmanship
  • Installations up to 10 kW are normally completed within a day     
  • We are licensed Electrical Contractors                         
  • Our registered Company is  over 10 Years old 
  • We are CEC Accredited in Solar System Design & Installation
  • We are accredited for Solar Grid connected & Off Grid Installation

Installation service is neat & professional

Van pic.png

 GL Solar- Driving forward - A Renewable Generation

 SYSTEM INFO + DOWNLOADS

aa panel Data.png AA Inverter Data.png
AA Monitoring.png
 AA Feed in Tariffs.png
AA How to use power.png AASTC.png AA How it works.png  Fronius Smart Meter


City ______________kWh*
Adelaide 43
Brisbane 43
Carins 43
Canberra 44.1
Hobart 35.91
Melbourne 36.93
Perth 45.14
Sydney 40.01
Average Daily Output 10.26kW
REC peak_silver.jpeg

 

The below table is an indication of what you would expect to achieve by installing a solar system with Queensland’s new power buy back scheme for a % of power not purchased from the Grid & for a % of power sold to the grid 

Package (Comparison Table)

System Size & Cost- (Roof Area M²)  
*Output-kWhr/Day & kWh/Year
*Savings/Year 
*ROI/Years
Rebate
Applied
3.5 kW/$3,657 (23M²) sell-1/2 Use-1/2
14.7kWh/Day & 5,365kWh/Year
$884/Year
ROI 4.2 Years
$2,479
4.32 kW/$4,795 (27.2M²) sell-1/2 Use-1/2
18kWh/Day & 6,570 kWh/Year
$1,083/Year
ROI 4.5Years
$3,071
5.4 kW/$5,048 (35M²) sell-2/3 Use-1/3
22.6kWh/Day & 8,278/kWh/Year
$1,130/Year 
ROI 4 Years
$3,708
6.48kW/$5,493 (44.M²) sell-2/3 Use-1/3
27.2kWh/Day & 9,933kWh/Year
$1,356/Year 
ROI 4.1 Years
$4,625
11.34kW/$9,551 (77M²) sell-2/3 Use-1/3
47.6kWh/Day & 17,374kWh/Year
$2,375/Year 
ROI 4.1 Years
$8,103

*Table Information in pop up here

 Yearly Savings

 3.5 - 4.3kW - Systems savings based on consuming 1/2 the energy you generate @ .25c/kWh & selling 1/2 back to the Grid @ .08c/kWh

 5.4 - 11.34kW - Systems saving based on consuming 1/3 of the energy you produce @25c/kWh & Selling 2/3 back to the grid @.08c/kWh

Rebates based on $37Aud per stc, however, this price can fluctuate as will the AUD adjusting cost of importing panels

 

 FINANCE 

There are x2 Residential Repayment Tables below 

  Pease confirm from table heading you are viewing the correct table  

 Quick View Table: 1

 Table:1 Standard Residential Solar Loan Repayment GuideFinance table 6_17.pngIMPORTANT NOTES: 

  • 1 There are no fees ever to repay the loan early!!
  • 2 All repayments quoted include the $795 setup costs that are added to loan amount
  • 3 Available to PAYG wage earners or self-employed persons or self-funded retirees
  • 4 Subject to approval, payments are a guide only, fees & charges, terms & conditions apply
  • 5 Loans over $15k require supplier tax invoice plus serial numbers prior to settlement and the supplier will be paid the funds directly
  • 6 Centrelink applicants and/or Non-homeowners please use our Non-Standard Solar Loan
  • 7 Apply Online and the repayment calculator are available on our website www.finance.energy 

 


 Non-Standard Residential Solar Loan (Centrelink recipients, non-homeowners & wage earners accepted) Loan repayment guide March 2017


Table:2

Finance tbl non std.png

IMPORTANT NOTES: 

  • 1 Centrelink benefits accepted include Carers Payment, Disability Allowance, Aged Pension, Veterans Affairs (Newstart Allowance and Sole Parent Payment not accepted)
  • 2 Property owners and non-property owners considered
  • 3 No deposit – 100% finance available
  • 4 Monthly repayments quoted include the $700 setup costs that are added to the base loan e.g. $9,000 system + $700 fees = loan of $9,700 is $203 month including fees
  • 5 Subject to approval, all figures are intended as a guide only, fees and charges, terms & conditions apply
  • 6 Unsecured rates range from 12% - 17% subject to individual credit assessment
  • 7 Minimum base loan is $5,000 plus fees 8 Loan terms available from 2 – 7 years

Fronius Symo Hybrid Inverter Video- How it Works

General System size daily output 

Avg daily production.png

Pop Up Enquiry Form Request a Quote