Outback Power

OFF GRID: Small Power User DC Coupled System
GL Solar System – Buckra Bendinni NSW OutBack Architecture

COMPONENTS BREAKDOWN

Model: VFXR3048E
50Hz/230Vac, Nominal DC Input Voltage- 48VDC
Continuous Power Rating at 25°C- 3000VA
OutBack inverter/chargers are the next generation in advanced power management.

Each is a DC to AC sinewave inverter, battery charger and AC transfer switch housed within a tough die-cast aluminum chassis.Just like the local utility grid, the inverter produces true sine wave AC electricity for your stand-alone or back up power needs. Computers, TVs, and pumps are just some of the examples of modern electronics that last longer and run better when powered with true sine wave electricity from an OutBack inverter. Starting up your well pump is worry-free because of our high surge power capability.

OUTBACK Flex Max 80 MPPT
X1 Charge Controller

The FLEXmax family of charge controllers is the latest innovation in Maximum PowerPoint Tracking (MPPT) charge controllers from OutBack Power Technologies. The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to none-MPPTcontrollers. Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating,60 Amps or 80 Amps respectively, in ambient temperatures as high as 104°F (40°C).

MATE 3 CONTROLLERwith Ethernet program, Manage and Monitor Entire System

  • Intuitive Menu Structure
  • Easy-To-Read Graphical Display
  • System Configuration Wizard
  • Internet Enabled
  • Field Upgradable
  • Up to 1-Year of Data Logging
  • SD Memory Card Slot
  • Optional Accessories: MATE3 USB Card

SMA Systems

OFF GRID POWER 
Medium – Large Power User
AC Coupled Solar Systems

With Sunny Island 
Either AC or DC Coupled system configurations are possible or a combination of both.

Use Produced Power direct off your solar panels first via a Grid style Inverter and a solar array that supply the main switchboard- (Pictured below the Red SMA Sunny Boy 5kW grid style inverters) The Sunny Island (Yellow)Battery Inverter also connected to the main switchboard can collect then re-direct energy for battery charging. Sunny Island being the brains of the system has bi-directional power functionality so can also send battery stored energy to the switchboard during the evening for use or anytime when there is not enough sun to produce power. Sunny Island will also control the Sunny Boy Inverters power output via Frequency Shift, thus supplying the exact amount of energy required at any given time to household loads or for battery charging. Sunny Island will also bring a generator online if battery levels are down too low to draw energy from or if there is not enough sun to charge batteries or supply loads directly. Wow! If only I could multi-task as good as Sunny Island. This Ac coupling method is great for supplying large daytime loads.

Ease of system design allows more flexibility with [expand title=”Read More”]less cabling. You could have one Sunny Boy and solar array on the house, another system installed on a detached garage or outbuilding then another system ground mounted. As long as all of the Sunny Boy’s supply the same main switchboard in which the battery Inverter is connected to, all components will form one larger grid. Community built mini-grids can be built in a similar way, using exactly the same components but just more of them.[/expand]

Run the bulk of your appliances through the day and reduce battery bank size

SMA Germany Pure Off-Grid AC Coupled System

SMA Sunny Island Inverter Charger
In conjunction to with SMA Sunny Boy inverters, the SMA sunny island controls the power coming and going out of your house. With three-way power control the Sunny Island utilises Solar power, Battery power and Generator/Mains power. To deliver energy to your house when you need it.
Sunny Island data sheet

Sunny Boy DC to AC Inverter – New Model 3.0-5.0kW
The Sunny Boy converts DC energy from the solar array to AC Energy, distributed via the Master Switch Board, Sunny Island also being connected to the same board uses this AC Energy for charging of the battery bank. The Sunny Boy inverter from SMA always ensures maximum energy yields from right your roof. For the ultimate in convenience, the integrated SMA Smart Connected service automatically informs the installer in the event of a malfunction. Intelligent and cost-effective module technology optimizes yields in the case of shadowing or unfavorable roof orientations.

Selectronic

AUSTRALIAN MANUFACTURING EXCELLENCE
Best in Class: Meeting High Energy Demand Requirements
Manufactured in Melbourne – 50 Years On
Selectronic SP Pro AU Series 2 Battery Inverter Charger

Off Grid Sine Wave Power Inverters
We offer a complete range of Selectronic sine wave power inverters giving you a quiet, clean, efficient source of remote power anywhere, any time. All Selectronic SP PRO inverters are suitable for single phase, split phase and three phase Off Grid power systems for households, homesteads, commercial properties, construction sites, or in fact any Off Grid site where you need better than mains quality power.

All Selectronic Off-Grid inverters are proudly Australian designed and built.

Interactive Inverter Chargers
Selectronic SP PRO Interactive Inverter Chargers use the battery bank to store excess energy from renewable sources (normally PV solar) for periods when power demand is low. When the power demand is too high for the inverter alone, or when the battery bank requires recharging, the inverter automatically starts a generator.

This unique range of inverter chargers allow sharing of the load between the inverter and the generator set to maximise power output capacity..

SP PRO Series
The SP PRO Series Inverters is the latest development of Interactive Inverter Chargers by Selectronic.

By managing all the functions of an off-grid power system, the SP PRO inverter ensures the efficient supply of mains quality power to the customer’s load as required. These functions include managing battery bank charge state, maximising renewable energy sources and operating the generator as required.

Sizes range from 3 kW to 20 kW for a single phase system, 6 kW to 40 kW for a split phase system and 9 kW to 60 kW for the SP PRO in a three phase configuration. Simple settings in the included SP LINK software enable the SP PRO to be configured for use in leisure and remote power systems. The SP PRO is suitable for residential, commercial and industrial applications.

Designed from the ground up, the SP PRO features advanced thermal power management and super super high digital signal processing; setting new standards for reliability, features, surge capability and power density.

SELECTRONIC MANAGED AC COUPLING WITH Fronius Primo

Manufactured in Austria
By combining the SP PRO inverter with a Selectronic Certified Fronius AC inverter in a Selectronic Managed AC coupling configuration, a fully integrated and managed off-grid power system is now possible.

This is just a few of  Selectronic SP Pro AU’s Capabilities Selectronic Australia smart energy solutions made easy!